Hot topics for both consumers and webmarketers on WebmasterRadio.FM
Every Wednesday, 4PM Eastern.
June 2, 2006, Newsletter Issue #104: You can do it
1
Tip of the Week
First, make sure you have the correct GFI outlet. Look at the breaker which feeds the circuit you are working on. As a rule (but not guaranteed), kitchen circuits are 20 amps, and bathroom, garage, and outdoor outlets are 15 amps. The clerk at the hardware store will show you the correct one to buy. Second, shut off the breaker feeding the circuit you are working on. Remove the old outlet and spread the wires out so they donīt touch each other. Turn the breaker back on and, with a circuit tester, determine which set (black and white) of wires is hot. Shut the breaker back off. Install the hot wires into the screw terminals marked LINE. The marking is on the back of the new outlet. It will also be marked to indicate the black terminal and the white terminal. If you have more sets of wires, they will be installed in the terminals marked LOAD. Screw the outlet into the box and turn the breaker back on. Push the reset button to "turn on" the outlet. Push the test button to make sure it is working properly, and then reset and enjoy.
2
About LifeTips
Now one of the top on-line publishers in the world, LifeTips offers
tips to millions of monthly visitors. Our mission mission is to make
your life smarter, better, faster and wiser. Expert writers earn dough
for what they know. And exclusive sponsors in each niche topic help us
make-it-all happen.
Founded in 2000, LifeTips offers fresh tips and advice to millions of readers. Become a Guru on a topic you're an expert in. Become a Sponsor and keep the tips flowing and traffic going to your website!
